Spas · Pools · Saunas · Heat pumps
Electrical for pools, spas, saunas & heat pumps
Spas, pools, saunas and heat pumps wired to the rules for wet areas: dedicated circuits, bonding, safety switches, tested and certified.
- 5.0 from 120 reviews
- NSW Lic 260121C
- Local since 2014
Water and electricity need extra care, and the Wiring Rules set out exactly where power can go around pools, spas and saunas. We do the electrical side: supply from the switchboard, dedicated circuits, safety switches, isolators, and the equipotential bonding pools and spas require.
We have wired spas, heat pumps and saunas across the Mountains and Penrith, including jobs that needed a bit of problem-solving to get right. Tell us what you are installing and where, and we will give you a fixed price.
- Earth continuity
- 0.21 Ω
- PASS
- Insulation resistance
- >200 MΩ
- PASS
- Fault loop impedance
- 0.42 Ω
- PASS
- Safety switch trip
- 18 ms
- PASS
- Polarity
- Correct
- PASS
What we wire up
- Plug-and-play and hard-wired spas
- Pool pumps, filters, chlorinators and pool lighting
- Heat pumps for pools, spas and hot water
- Infrared and traditional saunas
- Underground supply out to the pool area or outbuilding
Every pool, spa or sauna job includes
Supply and switchboard check
Spas and heat pumps draw serious current. We confirm your supply can carry it first.
Dedicated circuit and RCD
Its own circuit with safety switch protection, as the rules require for these appliances.
Equipotential bonding
Bonding of pool and spa metalwork where required, so there is no dangerous voltage difference near water.
Correct zone placement
Outlets, switches and isolators placed outside the restricted zones around the water.
Underground cabling
Trenching, conduit and cable to pool areas, decks and outbuildings.
Tested and certified
Verification testing and a Certificate of Compliance for Electrical Work.
Three steps, no surprises
Tell us about the job
A few quick taps on our quote form and a couple of photos. It takes about two minutes.
Get a fixed price
Nate comes back with an upfront price, or a quick question if something needs checking.
Done properly
Neat work, tested with calibrated instruments and certified, with paperwork where it is needed.
Why people choose us for pool, spa & sauna power
Licensed electricians
Not just testers or installers. If something fails or needs fixing, we can sort it on the spot.
Results you can prove
Readings are captured digitally and stored, so you get a report and not just a tick on an invoice.
The best test gear
Fluke TruTest software, a thermal camera and the Metrel DeltaPAT 3309 BT come to every relevant job.
Fixed, upfront prices
A free quote before we start, with no hidden extras.
Planned around you
We book in times that suit and work in sections where needed, so your home or business keeps running.
Local since 2014
Based in Katoomba and on the road across the Mountains and Penrith every day.
What customers say about our pool, spa & sauna power
120 Google reviews
“Nathan was great. We had a complex job installing a spa and heat pump. He stuck with it until it was all ironed out and stuck with the original quote, so thank you, Nathan!”
2025 · Google
“Nathan was fabulous! Worked efficiently and got my spa all set up!!”
2025 · Google
“Nathan is a brilliant tradesman with a heart of gold. He not only helped me with the electrical work for a sauna, but was more than happy to go above and beyond…”
2024 · Google
Pool, spa & sauna power: FAQs
Can my spa just plug into a power point?
Some smaller plug-and-play spas can, but it must be a dedicated, correctly rated outlet with safety switch protection, in the right position. Larger spas need to be hard-wired. We will check the spa specifications and tell you what yours needs.
Do you install the pool or spa itself?
No, we do the electrical work. We are happy to work alongside your pool builder, spa supplier or landscaper.
What is equipotential bonding?
It connects the metal parts around a pool or spa together so they stay at the same voltage, which prevents shocks if a fault occurs. It is required for many pool and spa installations and we include it where needed.
Get a quote for pool, spa & sauna power
Answer a few quick questions, add a photo or two, and Nate comes back with a price. It takes about two minutes and beats waiting for a call back.
Start my quote- No obligation, upfront price
- Photos mean faster, firmer quotes
- Urgent jobs are looked at first
Often booked together
New builds & installs
Complete wiring for new homes, extensions, granny flats, offices and commercial premises, from underground supply to final fit-off.
Find out moreResidential
From an extra power point to a full renovation or rewire. Tidy work, clean finish, no job too big or small.
Find out moreSwitchboard upgrades
Swap the old fuse box for a modern board with a safety switch on every circuit, labelled, tested and certified.
Find out morePool, spa & sauna power near you
Based in Katoomba, working across the Blue Mountains, Penrith and the Hawkesbury.